shopping cart empty
[dismiss] Kung Hei Fat Choy. FastTech will be on holiday from January 20, 2020, to January 31, 2020. Shipping and support will resume normal service on February 1, 2020. (details)
ekalle's Product Reviews
Sort:
Authentic Koopor Mini 60W TC Temperature Control VW Variable Wattage APV Box Mod
Authentic Koopor Mini 60W TC Temperature Control VW Variable Wattage APV Box Mod

Avatar
ekalle
Member

VERIFIED OWNER
  • JoinedApr 2015
  • Posts 75
  • Reviews 298
  • Kudos37
Overall   (4.2)
› Quality
› Value
4 of 4 people found the following review helpful
PROS
Performs well Ni200 and Ti Silicon sleve included Lots of settings Can be upgraded
CONS
Does not fit 22mm tank without hangover 3.5v cut off Only update by service centre Buttons rattle Battery door moves every time you grip the mod No usb charging Menu system auto accept to quickly.
This mod is nice but has been design by different teams that never comunicated. The placing of the 510 is idiotic. A 22mm tank will hang over the edge ang look really stupid. If the placed centered, even a 23mm should have no problem. The battery door is very loose. It does not fall off but moves every time you grip the mod. Very irritating!! To have a usb port and not use it for charging feels a bit old fashion and the 3.5v cut off forces you allways carrie extra 18650 around. The port can only be used for updates, but not by you. Has to be sent to a reseller that has got a special uograde adapter from Koopor. With this in mind, why have they placed the usb port expoced on the bottom and not under the battery door? And why have they made a cut out on the sleve for the usb port, that you can not use? This kind of poor design irritates me
Reviewed on Was this review helpful to you? Yes / No
Coppervape Hussar Styled RTA Rebuildable Tank Atomizer
Coppervape Hussar Styled RTA Rebuildable Tank Atomizer

Avatar
ekalle
Member

VERIFIED OWNER
  • JoinedApr 2015
  • Posts 75
  • Reviews 298
  • Kudos37
Overall   (5.0)
› Quality
› Value
3 of 3 people found the following review helpful
PROS
Nice machining Included extra AFC limiter for 2mm Included 2 extra PC tanks Bag with extra orings and screws Great flavor No leaks easy to top fill Good design, love the JFC Easy to build&wick nailed it the first time No Logos
CONS
Wish the PC tanks was PEI instead No Logos
I just love this RTA. It is very nice made, no sharp edges and buttery threads. Love the design of the Juice flow Control. It closes of tank completely, so you can unscrew tank from build deck, without turning the RTA up side down. The draw is very much a restricted DL with the 2,5mm limiter that is default, but with a very simpel operation, you can switch limiter to the 2.0mm and that will give you MTL. If you like cigg tight MTL, there is an extra limiter, to buy as an option, that will take the airflow down to 1,3mm. The top fill works good, without any leaking or flooding. The top-cap/mouth piece is not the best, but you can buy the optional torpedo style top-cap that is really beautiful and 510 compatible. The build deck is good and it is very easy to build&wick. I nailed it the very first time!!! The tank comes without Logos and I like that. Some will dislike it, so I put it up a both a pro&con. The only thing I really wished that CopperVape would have done differently, is to go with the V2 tank and instead of PC, given us PEI (Ultem) tank. I really hope thy will come as an option!!!
Reviewed on Was this review helpful to you? Yes / No
Authentic Joyetech Cubis Pro Clearomizer
Authentic Joyetech Cubis Pro Clearomizer

Avatar
ekalle
Member

VERIFIED OWNER
  • JoinedApr 2015
  • Posts 75
  • Reviews 298
  • Kudos37
Overall   (2.7)
› Quality
› Value
4 of 5 people found the following review helpful
PROS
Do not leak,,, AT ALL Small size but still 4ml Great look New top fill works perfect New air flow ctl works great Comes with lots of goodies, including 4 coils My Cubis Pro came with "scratch code" intact
CONS
LOTS of spitback!!! Gets VERY hot!!! Coils flood, but do not keep up (strange combo) Lots of condensation, that will be sucked upp and end up in your mouth. weak and a bit "off" in flavor (except from the e-juice that ends up in your mouth) Inconsistent in cloud production. (bad wicking)
This is a hard one to give a verdict about. Would really like to give it a thumbs up, but it has to many problems. The new filling system allows you to fill without taking out the coil as well. The new air-flow also is a step forward, from the cubis. The Cubis Pro will get VERY hot when using. REALLY VERY Hot!!! The coils I tested with it so far is - The new QCS coil Nice idea, to be able to rebuild, without recoiling. The problem is with feeding and spit-back. It will constantly spit e-juice in your mouth, and after filling or resting, it will give you a stream of hot liquid in your mouth. The strange thing is that, even if it spits and floods, it will not keep up if you take a few puff in a row. - The Notch Coil Same problem as the QCS coil. - The 0,5 Ohm 316 Coil A little bit better. Not so much spit-back, but you will still get a little drop with every puff. The coil has a bit more problems keeping up, due to the very small juice ports. Up-side of this is that it does not flood as much as the above. Still it will spit a lot after resting or filling. To get a full draw, you need to let the coil rest for a while between puffs. - 0,2 Ohm Ni200 coil Not included with the Cubis pro, but I had some, so I gave it a spin anyway. Not much performance to talk about. Hade to dial up the TC to 260Celcius to get any puffs to talk about. Puffs will not be so long, before the TC steps on the break, as it has the same small juice ports as the 0,5 316 coil it will not wick very good. About the same spit-back as the 0.5 316 as well. Have not tested the LVC coil yet. Maybe that one will be a bit better, as you can control the juice flow and has the vapor outlet at an ange, so the spit back should not reach all the way up the chimney. All in all, This is a tank with potential. Joyetech just needs to redesign the coils. As it is now, I can not recommend it!!
Reviewed on Was this review helpful to you? Yes / No
Authentic Eleaf iStick 40W 2600mAh Temperature Control VW APV Box Mod
Authentic Eleaf iStick 40W 2600mAh Temperature Control VW APV Box Mod

Avatar
ekalle
Member

VERIFIED OWNER
  • JoinedApr 2015
  • Posts 75
  • Reviews 298
  • Kudos37
Overall   (1.0)
› Quality
› Value
7 of 11 people found the following review helpful
I suspected that this was not the authentic device. The charge run measured to only 2350mAh and should be about 2500mAh. You can not drain the device completely. The battery have to have a Volt level enough to run the control card. This demands about 100mAh. Secondly, the authentication sticker/snr has, conveniently, been seamed to be removed. I contacted iSmoka, who told me that all devices should have a laser cut authentication on the chromed top plate in the format of Y1234. On the delivered device there is a laser cut Eleaf logo there instead. According to iSmoka, this is NOT an authentic device!!
Reviewed on Was this review helpful to you? Yes / No
Coppervape Skyline Styled RTA Rebuildable Tank Atomizer
Coppervape Skyline Styled RTA Rebuildable Tank Atomizer

Avatar
ekalle
Member

VERIFIED OWNER
  • JoinedApr 2015
  • Posts 75
  • Reviews 298
  • Kudos37
Overall   (5.0)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
Great machining, silky smooth threads Good 0-rings Simpel to build and wick Great flavor Does full DL to tight MTL, just by changing airdisc Good juice flow control Wicks like crazy No logos
CONS
As with the auth, the post holes should be offset to make it easier to get the coil in. No extra glass
This is the one to buy!!re Performs really well and is easy to work with, buid and wick. A very versatile RTA that does everything from full DL to tight MTL(with quality), just by changing the airdisc. The juice flow control is very good and the RTA wicks like crazy. One of a few RTA's where you may have to set the JFC to only half open. With this Skyline version, CopperVape has really shown us that they can do quality stuff. The machining is superb and the o-rings are better than normal. I strongly advice you to buy the pack of extra airdiscs to give all the choices to play with and find your optimal setting. also buy the extra glass tank, as it does not include a spare tank in the kit.
Reviewed on Was this review helpful to you? Yes / No