shopping cart empty

510 connection and 18350 mech mod
Login to post a new topic and to write a reply.
Thread Tools Rate This Thread


Search within thread:

Login to rate this thread.
#11 (permalink)      3/20/2021 6:23:44 PM US Central   quote/reply + tips
Avatar
cilika
Member
  • JoinedSep 2013
  • Posts 15155
  • Reviews 380
  • Kudos29164
Very nice!
The pin should be really floating or anyhow adjustable, did you try to crank down an old whatever 510 connector to see?
Maybe just screw-able from the inner side?

Edited on 3/20/2021 at 6:25 PM. Reason:
#12 (permalink)      3/20/2021 7:33:29 PM US Central   quote/reply + tips
Load64
Member
  • JoinedFeb 2016
  • Posts 21
  • Reviews 3
  • Kudos7
Hi,
I'm not sure if I understand what you mean...
You can adjust the screw inside the mod in order to make contact with the battery. But outside you can't adjust the 510 connection with the rta.
If your rta doesn't make contact, you can use this useful o-ring : sku 2156300 to increase the height of the 510 pin atomizer. That's what i had to do with the dvraw 16mm (without o-ring it doesn't make contact).
For exemple :

Kf lite 2021 = big gap :o


Fire bird = ok


Dvraw 16mm (and 22mm) = ok but an o-ring is needed.
#13 (permalink)      3/20/2021 8:36:14 PM US Central   quote/reply + tips
Avatar
cilika
Member
  • JoinedSep 2013
  • Posts 15155
  • Reviews 380
  • Kudos29164
Sounds that you were right, you're missing there a little screw* for being able to adjust for both...
Otherwise you can adjust your pin for your atomiser's connector, and use these to stuck one on your battery (there are different sizes/lengths if you check out the drop menu) Those were very useful for mech mods, if you vape at higher ohms they don't cause any significant V-drop.


*or it's just about what I mentioned in post #4

Edited on 3/20/2021 at 10:14 PM. Reason:
#14 (permalink)      3/20/2021 8:40:33 PM US Central   quote/reply + tips
Avatar
cilika
Member
  • JoinedSep 2013
  • Posts 15155
  • Reviews 380
  • Kudos29164
As it's telescopic, you can "move" that big gap with the Lite on the middle of your mod (I know it's not very pleasing for the eyes though), maybe put a black o-ring there? ;)