Free shipping to the United States when you order $20+

@ Anniepan 510?
Login to post a new topic and to write a reply.
Thread Tools


Search within thread:

Rate This Thread
Login to rate this thread.
#1 (permalink)      4/29/2020 10:34:51 AM US Central   quote/reply + tips
Avatar
Ryno619
Verified
  • JoinedApr 2019
  • Posts 439
  • Reviews 46
  • Kudos284
@ Anniepan 510?
Not shown in the listed photos. Could you please confirm if 510 adapter with tool come with this kit?

Edited on 4/30/2020 at 4:35 PM. Reason:
“For every minute you are angry you lose sixty seconds of happiness.”
#2 (permalink)      4/29/2020 1:00:25 PM US Central   quote/reply + tips
Avatar
viking65
Verified
  • JoinedJul 2013
  • Posts 32475
  • Reviews 14
  • Kudos64547
+2 details
Does not come with a 510 adapter
https://i.imgur.com/OSS6yni.jpg
#3 (permalink)      5/4/2020 11:21:39 AM US Central   quote/reply + tips
Avatar
Ryno619
Verified
  • JoinedApr 2019
  • Posts 439
  • Reviews 46
  • Kudos284
viking65 wrote:

Does not come with a 510 adapter


That’s too bad since other sites include the 510 adapter. I guess I will have to use spaced coil builds to not get hot spots.

“For every minute you are angry you lose sixty seconds of happiness.”
#4 (permalink)      6/2/2020 3:44:03 PM US Central   quote/reply + tips
Avatar
blackhack
Verified
  • JoinedOct 2013
  • Posts 662
  • Reviews 69
  • Kudos487
+1 details
It does come with an 510 adaptor, I got mine today and it was included.
Insert smart and witty comment here.....
#5 (permalink)      6/2/2020 4:08:31 PM US Central   quote/reply + tips
Avatar
Ryno619
Verified
  • JoinedApr 2019
  • Posts 439
  • Reviews 46
  • Kudos284
Awesome! Mine came with a 510 as well blackhack. Glad it did and that FT updated the photo listing. Loving this set up. I totally under wicked the first build and had major leakage in my Bantam, keep a good eye on it if you have a BB with the chip below the tank. Used more cotton on second build and now have no issues, the vape is smooth and tasty.
“For every minute you are angry you lose sixty seconds of happiness.”
#6 (permalink)      6/2/2020 4:21:31 PM US Central   quote/reply + tips
Avatar
blackhack
Verified
  • JoinedOct 2013
  • Posts 662
  • Reviews 69
  • Kudos487
+1 details
Me to, Ryno619....First build was a disaster as there was a tail of kanthal stopping the base from fitting properly, Second build was too much cotton, but third build was just about perfect....bit of leaking, but the vape quality and cloudage is top notch.......I'll do another build when the tank runs low and adjust with a bit more cotton and that should sort out the leakage.......This bridge is perfect for my style of vaping ....I was seriously considering getting rid of my billet box as there just wasn't enough air going through it for me.
Insert smart and witty comment here.....
#7 (permalink)      8/1/2020 5:35:18 AM US Central   quote/reply + tips
Avatar
cilika
Verified
  • JoinedSep 2013
  • Posts 16425
  • Reviews 395
  • Kudos29900
Hi, do the Kindbright airflow inserts fit in this?
#8 (permalink)      8/16/2020 5:43:57 PM US Central   quote/reply + tips
Avatar
Wylie
Verified
  • JoinedMay 2013
  • Posts 5968
  • Reviews 78
  • Kudos3873
Mine came with the 510 build adapter. Glad I bought 2, a 40+ year smoker has adopted the first that I put a wick and coil in.
Always keep your ear to the ground!
#9 (permalink)      8/17/2020 8:59:00 PM US Central   quote/reply + tips
Avatar
Wylie
Verified
  • JoinedMay 2013
  • Posts 5968
  • Reviews 78
  • Kudos3873
Between the two I purchased there are possibly some machining discrepancies.

The second I installed a wick and coil in leaked, three builds in a row yet I nailed the first build on the first effort.

I disassembled and found if the plastic nut is tightened too tight it dead shorts the atomizer because the build post with the ring cants at an angle as it is tightened making contact with the other build post.

I managed to get the leaking stopped but all parts are not as tightly assembled as I'd prefer.

Potential cures, don't tighten the plastic nut too tight or install a non-conductive ring to help support the ring attached to the isolated build post.
Always keep your ear to the ground!