shopping cart empty
Bobo64's Product Reviews
Sort:
FEV VS Styled RTA Rebuildable Tank Atomizer
FEV VS Styled RTA Rebuildable Tank Atomizer

Bobo64
Member

VERIFIED OWNER
  • JoinedNov 2016
  • Posts 41
  • Reviews 10
  • Kudos7
Overall   (2.2)
› Quality
› Value
PROS
good general quality but ...
CONS
... the base does not work!
... or, if it works, it works for a short time. Then internally it is short-circuited, or a wire comes off ... and then "goodbye"! Excellent only as "spare parts" of Fev 17mm bought elsewhere.
Reviewed on Was this review helpful to you? Yes / No
YFTK In'Ax V5 Styled RTA Rebuildable Tank Atomizer
YFTK In'Ax V5 Styled RTA Rebuildable Tank Atomizer

Bobo64
Member

VERIFIED OWNER
  • JoinedNov 2016
  • Posts 41
  • Reviews 10
  • Kudos7
Overall   (3.2)
› Quality
› Value
PROS
good threads Heatsink Good taste
CONS
poor plastic tank useless steel tank delicate, fragile, therefore insufficient spare parts poor plastic drip tip
Poor endowment given the price and potential of this genesis: 1) the steel tank is useless because it is blind: Yftk could do it (and I hope he will soon) in glass, much more useful. 2) The tank in poor plastic cannot even be looked at! .. much better had it been in derlin or other material resistant to acid liquids. Even better, a second pyrex tank. 3) Ceramics will also be a good idea, but it is rigid and fragile: and moreover, with heat, it does not last at all. The vertical cylindrical insulator also lasts a short time also because the mesh that slides over it is rough. 4) The lower ceramic insulator I already see that the hours are counted...it would have been better to double it twice...even at the cost of putting fewer rounds of mesh. Anyway, a spare peek insulator is necessary. 5) The upper disk-insulator of the screw "plug" broke on the first use! Really too subtle and fragile: even better here in peek. 6) The top "screw cap" will also look nice in metal, but it goes in short circuit with metal drip tip! Warning! 7) The o-rings that hold the tank are too thin in height, and without abundant lubrication tend to come out of the seat: they were double the height (because as diameter they are fine) this problem would be solved. 8) The steel frame and screws are made well. Too bad it's not bottom feeder...(coming soon...? ) 9) Uncomfortable refill cap = too tight. A small high metal screw like "Origen genesis V2 22mm" would have been better.
Reviewed on Was this review helpful to you? Yes / No
YFTK NextEra Styled BF RTA Rebuildable Tank Atomizer
YFTK NextEra Styled BF RTA Rebuildable Tank Atomizer

Bobo64
Member

VERIFIED OWNER
  • JoinedNov 2016
  • Posts 41
  • Reviews 10
  • Kudos7
Overall   (3.0)
› Quality
› Value
1 of 2 people found the following review helpful
PROS
Great Flavour. Great airflow. Pin bf ok
CONS
The positive-pin of the device can short-circuit with the cap !
Since there are no threads, but o-rings, it would not cost anything to make the glass tank... More hygienic and durable, as well as more beautiful ;-)
Reviewed on Was this review helpful to you? Yes / No
YFTK NextEra Styled BF RTA Rebuildable Tank Atomizer
YFTK NextEra Styled BF RTA Rebuildable Tank Atomizer

Bobo64
Member

VERIFIED OWNER
  • JoinedNov 2016
  • Posts 41
  • Reviews 10
  • Kudos7
Overall   (3.5)
› Quality
› Value
1 of 2 people found the following review helpful
PROS
Excellent aroma good materials.
CONS
the atomizer can short circuit. delicate o-rings
I want to immediately underline a defect, because it's important: once you put the top cap, if you inadvertently rotate it, the positive pin touches the bell and the atomizer goes into shorts. Unacceptable.! A rotation stop was enough .... Unacceptable, especially if mounted on a mechanical tube without protection ..! That said, in general it is a good atomizer, both with cotton and with the mesh. Beyond the average.
Reviewed on Was this review helpful to you? Yes / No
Spider Styled RDA
Spider Styled RDA

Bobo64
Member

VERIFIED OWNER
  • JoinedNov 2016
  • Posts 41
  • Reviews 10
  • Kudos7
Overall   (4.0)
› Quality
› Value
PROS
Easy Excellent aroma
CONS
central o-ring wrong to measure: move the cap
Optimally built and works all right. Here we see the quality of Yftk. And it seems very strange that the same company has built the poor (= horrible threads) Ataman. An abyss of difference.
Reviewed on Was this review helpful to you? Yes / No