shopping cart empty
Captain_Pegleg's Product Reviews
Sort:
Authentic Eleaf iStick Power Nano 40W 1100mAh TC VW APV Mod (White)
Authentic Eleaf iStick Power Nano 40W 1100mAh TC VW APV Mod (White)

Captain_Pegleg
Member

VERIFIED OWNER
  • JoinedJul 2015
  • Posts 39
  • Reviews 8
  • Kudos10
Overall   (4.0)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
Bypass mode allows over 40 watts Even smaller than I imagined Battery life is just as expected
CONS
Short 510 pin - many tanks sit proud Menu button is teeny tiny
Very pocket friendly with my Serpent Mini, and just enough power to blow satisfying clouds. I love Bypass mode, see my picture :) battery lasts long enough considering it's as short as a 600 mAh Ego, and allows subohm builds. Price is also right. I do not like the gap between my tanks and this battery, the 510 pin threadin looks even more shallow than my other iSticks :(
Reviewed on Was this review helpful to you? Yes / No
Authentic MKWS 316L Stainless Steel Taiji Heating Wire for RBA Atomizer
Authentic MKWS 316L Stainless Steel Taiji Heating Wire for RBA Atomizer

Captain_Pegleg
Member

VERIFIED OWNER
  • JoinedJul 2015
  • Posts 39
  • Reviews 8
  • Kudos10
Overall   (2.5)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
None really
CONS
Lots of messed up spots on my spool Uneven Even the best segments heat unevenly
The plain wire heats up much faster than the claptoned wires, making for a yucky vape. I've had to cut out big segments of this wire to throw away because the claptoning was way messed up, and some parts seemed to be missing the core wire completely :/ Difficult to work with and impossible to get a good, even glowing coil. Bad taste even after the most careful dry burn and clean I could manage.
Reviewed on Was this review helpful to you? Yes / No

Captain_Pegleg
Member

VERIFIED OWNER
  • JoinedJul 2015
  • Posts 39
  • Reviews 8
  • Kudos10
Overall   (3.2)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Almost leak-proof Idiot-proof wicking Juice flow control Two decks Two tank sizes Phillips screws Giant post holes
CONS
Tank and chimney were STUCK Some rough threads Deceptively less room for big ID coils than I thought
Firstly, this tank is enjoyable to build on and vape. It is easiest to build and wick so far, for me. It's like the Griffin without a stick up it's ass. Secondly, the AFC is very snug, overall tolerances seem a bit hit and miss, but it works without leaking. I am a little cautious of the 510 pin because there is Noticeable gap between pin and insulator. With time and enough condensation, this Would leak there. I had to literally, intentionally, break the 2mL glass it came with, then use rubber gloves to separate the top from the chimney. It was that stuck. But hey, I got a spare. Other than that, it's a cloud machine and also has good flavor. Oh, last thing...big ID coils (like 4mm) are hard to fit without the roof of the chimney touching and shorting them. I thought 26mm meant huge coils (which Will fit in the single coil deck, 4.5 mm no problem), but really the extra width seems to make wicking go more smoothly. I give 4/5 because it works great but feels cheap (luckily, it WAS cheap.)
Reviewed on Was this review helpful to you? Yes / No

Captain_Pegleg
Member

VERIFIED OWNER
  • JoinedJul 2015
  • Posts 39
  • Reviews 8
  • Kudos10
Overall   (4.7)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Light Pocket friendly Scratch-resistant Simple Menu Multiple Modes Bright Screen
CONS
Incorrect Voltage display on one battery My tanks dont sit flush
I've been using this for over a month now and I still love it. It's my main mod now, it's slightly smaller, much lighter, and much easier to pocket than my istick TC 100W which is the closest I can compare it to. It has two extra modes which are neat, one where you can set it to boost or lower wattage for a specific time, like say boost wattage by 30 watts for 1.5 seconds, this removes ramp up for heavy coils. It charges well by USB even if one battery reports 0.1 volts lower than actual. Batteries drain evenly. Feels great in my small hand, and the plastic seems durable, part is rubberized coated. Worth the low price, probably worth more really but shhh. Oh, and the battery sled design makes it super easy to insert/remove batteries, and without tearing the wrap.
Reviewed on Was this review helpful to you? Yes / No
HOWING Kanthal A1 Heating Wire for RBA Atomizers
HOWING Kanthal A1 Heating Wire for RBA Atomizers

Captain_Pegleg
Member

VERIFIED OWNER
  • JoinedJul 2015
  • Posts 39
  • Reviews 8
  • Kudos10
Overall   (5.0)
› Quality
› Value
PROS
Consistent
CONS
None
Good wire, would recommend A++++
Reviewed on Was this review helpful to you? Yes / No