[dismiss] Holiday closure: from January 27th to February 7th, 2022. Shipping and support will resume on February 8th, 2022. (details)
FastTech wishes you and yours a safe and prosperous year of Tiger 🐱.
ListlessSpectre's Product Reviews
Sort:

Avatar
ListlessSpectre
Member

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 525
  • Reviews 107
  • Kudos193
Overall   (2.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
It vapes okay Looks good Switch is better after magnet upgrade
CONS
Quality is trash
I've had this for a couple of weeks already and although I doubted the quality originally, my fears were verified earlier tonight. The threads where the top cap and the upper tube meet no longer screw together and after a visual inspection, I see why. The actual top cap is held on by 3 turns of threads, the first 2 of which barely grab. I went to vape on it with my Fogger V4 and as I pressed the switch, the entire atty and top cap pooped right up. I took superglue and basically glued the top cap onto the tube, but this shouldn't happen regardless. It's garbage, kids. Move along and find a better quality one.
Reviewed on Was this review helpful to you? Yes / No

Avatar
ListlessSpectre
Member

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 525
  • Reviews 107
  • Kudos193
Overall   (5.0)
› Quality
› Value
PROS
Beautiful finish Machining is flawless Great flavor producer Engravings
CONS
None
I have 2 other Reload S RDAs and neither rival the quality of this one. Flavor and vapor production are perfect in fitting my preferences. Get one. You'll be glad you did.
Reviewed on Was this review helpful to you? Yes / No

Avatar
ListlessSpectre
Member

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 525
  • Reviews 107
  • Kudos193
Overall   (5.0)
› Quality
› Value
PROS
Machining, finish, no burrs/sharp edges, easy to build on, flavor is much better than the MTL version. No wicking issues at all.
CONS
Screw tap debris left in the post holes
I dropped this in the cart for 2 reasons, 1) I wasn't really happy with the MTL version 2)I have a King mod with the exact same finish and it just so happens to be 23mm. I also bought the extension (SKU: 9685515), Spares (SKU: 9680750) and a separate tank section (SKU: 9678553) for when they decide to discontinue it. My experience: I got it home, disassembled it entirely and dropped it in 91% alcohol, rinsed everything and scrubbed the bejesus out of it with Dawn detergent, rinsed and air dried everything. I was when I checked the post threads that I realized that some tapping debris was left behind that was actually crushed down by the screws. Wasn't really happy about that, but I took a q-tip with some alcohol and managed to get it out. I wrapped up a coil with some Coilology Tri-Core fused clapton wire (ID: 2.5mm) @ 6 wraps that ohm'ed out about .34, which is my comfort zone. Wick of choice is Koh Gen Do snipped right to the edges of the juice wells and tweezed to fluff the ends just enough to get a little overhang on the inner edge of the well. It's perfect. Not a single dry hit hit and no flooding. Flavor is much better than the MTL (imo)and the draw is perfect for DTL without it being too airy with the airflow fully open. Vapor production is stellar and I have to admit, I'm really enjoying the chill factor I'm getting with this setup. Sure, the topcap looks more like an acorn than a golfball, but it's really found it's place with the matchy-matchy and I've already been complimented on it. I'm really enjoying it.
Reviewed on Was this review helpful to you? Yes / No
SXK Reload S Styled RDA Rebuildable Dripping Atomizer
SXK Reload S Styled RDA Rebuildable Dripping Atomizer

Avatar
ListlessSpectre
Member

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 525
  • Reviews 107
  • Kudos193
Overall   (4.0)
› Quality
› Value
PROS
Clean! No engravings Machining is quality Great for squonking Dat polished SS tho!
CONS
None
Great looking single coil atty with a simple profile and a mostly conical inner topcap. I've had 0 issues with it so far and the flavor may not be as good as a Wasp, it's still respectable.
Reviewed on Was this review helpful to you? Yes / No

Avatar
ListlessSpectre
Member

VERIFIED OWNER
  • JoinedJan 2014
  • Posts 525
  • Reviews 107
  • Kudos193
Overall   (5.0)
› Quality
› Value
PROS
SXK manufactured Steel posts for longevity CLEAN!! No burring, no oil, no overly sharp edges Logo is deeply engraved Comes w/ the squonk pin
CONS
None
SXK shines again. The RDA is immaculate and comes with just enough protruding 510 (about 2MM) to fit any hybrid mod. This recent release of RDAs with 6-7mm 510 pins just makes more work for me, so it's refreshing that I finally don't have to spend 20 minutes grinding the pin down. This is a great deal for this type of quality and it's a great performer. Highly recommended.
Reviewed on Was this review helpful to you? Yes / No