[dismiss] FastTech will be on holiday from October 1, 2022 to October 7, 2022. All services resume on October 8, 2022, at 1:00 am (UTC). (details).
SidKennedy's Product Reviews
Sort:
Soap Holder Sponge Cup Sundries Stand Kitchen Draining Brush Storage Rack
Soap Holder Sponge Cup Sundries Stand Kitchen Draining Brush Storage Rack

Avatar
SidKennedy
Verified

VERIFIED OWNER
  • JoinedAug 2015
  • Posts 217
  • Reviews 58
  • Kudos115
Overall   (3.5)
› Quality
› Value
PROS
useful functions as advertised two suckers ensure it stays on the wall
CONS
thin plastic needs assembling
nice, useful addition to the kitchen. The plastic is quite thin and the suction knobs come loose so I managed to crack the thing trying to put them in. Luckily it's just a hairline crack so I can still use it.
Reviewed on

Avatar
SidKennedy
Verified

VERIFIED OWNER
  • JoinedAug 2015
  • Posts 217
  • Reviews 58
  • Kudos115
Overall   (3.7)
› Quality
› Value
PROS
wide bore colour press-fit
CONS
press-fit
My first press-fit DT and I'm not displeased even though it does not sit flush in my current Aeolus set-up SKU2333001. The advantage of it being press-fit in this case though is that it sits nice and tight so lifting off the top-cap to re-fill and check saturation of wicking is easy. Many other DTs come off when carrying out this operation. The white goes well with white and black mods/ atties.
Reviewed on

Avatar
SidKennedy
Verified

VERIFIED OWNER
  • JoinedAug 2015
  • Posts 217
  • Reviews 58
  • Kudos115
Overall   (4.5)
› Quality
› Value
PROS
small wide bore pretty
CONS
small
I really like this DT. I bought a couple PEI ones to complement my Le Zephyr and this one is the winner. Slightly lighter shade than the Ultem on the atty but nevertheless a nice combo. The bore is not too narrow and most importantly for me, does have the same size on the bottom than on the top (so liquid has nowhere to pool but runs back onto the wick). Yes, it's small but I guess that will be a pro for some and a con for others.
Reviewed on

Avatar
SidKennedy
Verified

VERIFIED OWNER
  • JoinedAug 2015
  • Posts 217
  • Reviews 58
  • Kudos115
Overall   (1.5)
› Quality
› Value
PROS
light weight
CONS
badly finished
the copper paint (?) has already started to come off after a couple of weeks' use and is now reacting with the liquid residue to produce a green substance. that can't be healthy... the carbon fibre tip has sharp edges so watch out not to cut your lip open. One of the worst drip tips in my collection in relation to quality!
Reviewed on

Avatar
SidKennedy
Verified

VERIFIED OWNER
  • JoinedAug 2015
  • Posts 217
  • Reviews 58
  • Kudos115
Overall   (3.5)
› Quality
› Value
PROS
Good Value
CONS
Spinning center post Plastic drip tip O-rings ill fitting
I've got a couple of SKU3047000 and was very pleased. One of them had a spinning center post, the other one didn't. This black one also has this problem but it's not the end of the world (you just have to keep it in mind when screwing it on a mod). Sometimes, you screw it back out by hand. Always remember to check the alignment of the air holes with the coils once it's on! The other two issues with this one: 1) the drip tip is a cheap plastic version of the nice teflon (?) one you get with the more expensive silver versions 2) the O-rings are not a good fit and needed replacing with slightly bigger ones to ensure the top didn't come off in the pocket. Overall, I'm pleased with it as a backup (or as a nice looking black atty for my black Stingray X mod). Flavour and ease of use great, just like the other ones I have.
Reviewed on