shopping cart empty
Vape4more's Product Reviews
Sort:

Avatar
Vape4more
Member

VERIFIED OWNER
  • JoinedMay 2015
  • Posts 3095
  • Reviews 113
  • Kudos2191
Overall   (5.0)
› Quality
› Value
6 of 10 people found the following review helpful
PROS
Very tough Heaps of flavour Heaps of vapour Easy to use Cheap replacement coils
These would have to be the best value and flavoursome clearomisers I have ever used and come in a variety of different colours for you to choose from. For mouth lung, (like an analogue cigarette), these are the best clearomisers to start your path into Vaping and you'll NEVER be disappointed with these. Thanks to the metal housing, they can withstand lot's of punishment without breaking and are very easy to fill while your on the go. In saying that, to make filling so clean and easy, I do recommend you to buy the needle tipped bottles available here at FastTech....(SKU1485903) For me, these clearomisers are just perfect. They have a large 3ml capacity and produce so much flavour, making your E-liquid taste so good. I was also surprised in how much vapour these little things produce! These Aspire clearomisers easily screw onto eGo fittings and even the coils are cheap n easy to replace... What more could you ask for? By trial and error, I've found the best replacement coils are the Authentic Aspire 1.6 ohm variety....(SKU1859406). These coils work best at around 10 to 12 watt's or 4 to 4.4 volts and if you prime the coil properly (only before first use), they will last for about 3 weeks (or about 100-150ml) before you need to replace them. If you need to use an eGo ADAPTER, (SKU2044706) is the CORRECT CHOICE, as I've found this Aspire ET-S clearomiser will NOT screw onto SOME aftermarket adapters. Do not take the voltage over 4.4 volts or the coils will burn easily and taste bad. To prime the coil before first using, means to squirt some juice directly into the coil itself before screwing it onto the clearomiser. These little Vertical coils will burn so easy and taste bad, if not properly saturated with juice first. So take your time and do a good job. Any gurgling found after priming your coil, can easily be fixed with paper towel, twisted up, then pushed down into the chimney.
Reviewed on Was this review helpful to you? Yes / No

Avatar
Vape4more
Member

VERIFIED OWNER
  • JoinedMay 2015
  • Posts 3095
  • Reviews 113
  • Kudos2191
Overall   (5.0)
› Quality
› Value
2 of 3 people found the following review helpful
PROS
Great price It's Kanthal
I have found this resistance wire to be the perfect size for re-building Aspire BVC coils. I have played around with different length and size coils and ended up very happy with a 1.2 ohm coil made out of this Kanthal. REPLACE YOUR COIL OFTEN, or you will get build up inside like this. (Picture provided)
Reviewed on Was this review helpful to you? Yes / No

Avatar
Vape4more
Member

VERIFIED OWNER
  • JoinedMay 2015
  • Posts 3095
  • Reviews 113
  • Kudos2191
Overall   (2.7)
› Quality
› Value
2 of 3 people found the following review helpful
PROS
Not working in Aspire K1 Only good for high ratio PG juice
CONS
VERY SMALL WICKING HOLES Giving lot's of dry hits with high VG Giving burnt taste with high VG juice
These coils are built well and work ok with HIGH PG JUICE, but they are giving open circuit problems with some eGo devices, also the wicking holes are way too small for high content VG juice. The centre pin is 0.2mm shorter than that of the Authentic Variety, so in some eGo applications, they do not work at all..... This problem can be sorted with an eGo adapter fitting. Next is a problem with high VG Juice.. When the juice is cold and around 70% VG, the juice cant get through the very small wicking holes, giving a burnt taste or dry hit's.... SO BAD, lol.... I have experimented with these coils, made wicking holes larger and found the dry/burnt hits have gone. I have also taken a picture and hope it is approved for display here. Buy the Authentic coils.... Much better off..
Reviewed on Was this review helpful to you? Yes / No
5PCS SUBTANK Vertical OCC Coil Head
5PCS SUBTANK Vertical OCC Coil Head

Avatar
Vape4more
Member

VERIFIED OWNER
  • JoinedMay 2015
  • Posts 3095
  • Reviews 113
  • Kudos2191
Overall   (5.0)
› Quality
› Value
6 of 11 people found the following review helpful
PROS
Authentic parts cheap at FastTech Free delivery to your door Long lasting coils
These coils are long lasting if you don't burn the shitter out of them. The darker the juice, the quicker the coils will build up with crap and burn out. They will work well with juice ratios of around PG40 and PG30-VG70 is still ok if your not chain Vaping. With a fresh coil, make sure you prime the cotton with a few drips of juice first, that's BEFORE INSTALATION!..... These make your juice taste real good and I think the 1.2 coils taste better than the 0.5ohm variety.
Reviewed on Was this review helpful to you? Yes / No

Avatar
Vape4more
Member

VERIFIED OWNER
  • JoinedMay 2015
  • Posts 3095
  • Reviews 113
  • Kudos2191
Overall   (5.0)
› Quality
› Value
2 of 3 people found the following review helpful
PROS
Large internal battery, easy to use, cheap and VERY GOOD
CONS
No way of knowing how much battery life is remaining
Oh, my god...... It makes everything taste SO MUCH BETTER! Simple settings control, great 2600mAh battery for long time Vape. I am using an Aspire K1, 1.8ohm coil and running the Overlord at around 5.2 Volts. I will now be dropping my nicotine and flavour levels in my juice. It looks great and feels good sitting in my hand. I will give it 10 out of 10 and several thousand extra browney points for being simplistic, cheap and very usable... Well done Clover and FASTTECH :)
Reviewed on Was this review helpful to you? Yes / No