shopping cart empty
beefy0678's Product Reviews
Sort:
Magic Stick CW 6-in-1 Wire Coiling Tool Kit
Magic Stick CW 6-in-1 Wire Coiling Tool Kit

Avatar
beefy0678
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 476
  • Reviews 124
  • Kudos228
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Wide range of sizes Only 3 caps Flat sided screws Free scissors and tweezers
CONS
None
I laughed at the scissors when i saw them in the pictures but now i have them they are excellent! They cut through cotton just as well as my textile scissors and are comfortable to hold as the finger holes are nice and wide. They fold up really good too! The coiling kit is great, it has got 3 screw postitions unlike others which only have 2 so you have slightly more control over the different sizes of wire you use. The 1 and only negative i have for this is that on the 4mm one the screw holes aren't very far away from the post so the first setting won't fit any wire in it no matter how small! Other than that though this is a great kit, much better than the coil master one i bought. Also the main handle is soli aluminium so it was easy for me to drill exrta holes in it so i can wrap wire the other way round for my marquis atty, i have also done one straight in for doing coil rebuilds on the atlantis etc.
Reviewed on Was this review helpful to you? Yes / No

Avatar
beefy0678
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 476
  • Reviews 124
  • Kudos228
Overall   (4.7)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Soft so doesn't chip your teeth Fits snugly into every atty i have got
CONS
rubbery smell
They fit into all of my attys well and tight, but there is a rubbery smell to them, don't know if it will go over time but i can taste it slightly when using it, hope it does go as they are nice to use
Reviewed on Was this review helpful to you? Yes / No

Avatar
beefy0678
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 476
  • Reviews 124
  • Kudos228
Overall   (4.7)
› Quality
› Value
PROS
Easy to fill Easy to build Good size post holes for fitting claptons etc Comes with all the markings (Says coil art on the chimney and Mage across the bottom
CONS
Can leak a little if you don't wick it right
Had this a couple of weeks now and it is working great. I vape about 15 to 20pg and 80 to 85vg and this bad boy still keeps up with the wicking even when vaping one after another. Looks and fits really nice on my RX200 and Cuboid. Even with the little hangover on my evic vtc mini when i put a sleeve on the mod the sleeve covers the hangover so you don't notice it. It has all the markings of the original. If you screw the chimney down too tight when putting it together then you get a little gap showing where the o-ring is so i screw it most of the way down and then attch the chimney, this makes everything fits nicely and you can't see any gaps. Also this seems to help with the center pin protruding too far and not working on some of my mods. Although it makes no difference to my evic vtc mini as that fires it no matter what! Overall highly recommended, the mouthpiece doesn't get hot and the flavour is great, for this price don't bother with the original, just get this!
Reviewed on Was this review helpful to you? Yes / No

Avatar
beefy0678
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 476
  • Reviews 124
  • Kudos228
Overall   (5.0)
› Quality
› Value
PROS
Great finish Fits loads of open top rdas Very thick so it heats up slowly Comes with different size orings to help it fit slightly different size rdas
CONS
None
Just recently went back to some of my old rdas and wanted a nice cap for them, this is perfect! It fits my YEP clones, mutation v2and my petri rda (all clones from here) One thing I did worry about was it getting hot, but it seems that because it is so thick and there is a lot of metal that it takes a long time to heat up. I am using this currently on my YEP clone (mutation v3 on here) with a dual 24/32 clapton build at 0.3 ohms running 110watts through it and no burnt lips! It just doesn't seem to want to heat up! Definitely recommend it to anyone who has got an rda that this will fit and doesn't care about having the airflow all the way open all of the time.
Reviewed on Was this review helpful to you? Yes / No

Avatar
beefy0678
Member

VERIFIED OWNER
  • JoinedJan 2015
  • Posts 476
  • Reviews 124
  • Kudos228
Overall   (3.0)
› Quality
› Value
PROS
Fits the mini
CONS
Doesn't make contact properly all time
Worked ok for a few days then my RX200 started saying no atomizer so i just thought it had come loose somehow and tightened it up, but i kept having to do this and it started coming apart. The bottom of it is press fitted together and they haven't done a good job of mine, it opened up that much it nearly fell off. the airflow ring was able to move freely but up and down not around... hopefully i have got the only bad one but be aware that if you get this it might be a pile of crap.
Reviewed on Was this review helpful to you? Yes / No