shopping cart empty
cebzab's Product Reviews
Sort:
SXK STH Styled 60W VW APV Box Mod
SXK STH Styled 60W VW APV Box Mod

Avatar
cebzab
Member

VERIFIED OWNER
  • JoinedAug 2018
  • Posts 20
  • Reviews 41
  • Kudos7
Overall   (4.5)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
Super lightweight Regulated Good looks
CONS
Chip is slow Battery cap
Pros: Super lightweight, original sunbox is not regulated but this one is, it looks amazing especially with dvarw and taifun gtr. They sit almost flush with the top of the mod. Cons: While being regulated, the chip is not the most responsive. It feels like running over demanding game on a slow computer. Also every time you want to remove the battery you need a coin or some other tool to remove it. It can't be done with fingers only All in all, it's a really nice side by side mod. It's not perfect, but it works good, feels good, and looks amazing with the right atomizer.
Reviewed on Was this review helpful to you? Yes / No
YFTK Haku Xeta Inside Styled RBA Rebuildable Atomizer for BB Box Mod Kit
YFTK Haku Xeta Inside Styled RBA Rebuildable Atomizer for BB Box Mod Kit

Avatar
cebzab
Member

VERIFIED OWNER
  • JoinedAug 2018
  • Posts 20
  • Reviews 41
  • Kudos7
Overall   (4.5)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
Good quality Everything fits Easy to build on Nice amount of accessories
CONS
Not built for my style of MTL
This little thing is pretty good for most of the people. Unfortunately for myself I'm not in that group. Quality is really good. Everything fits perfectly and works perfectly. If built properly it will never leak, but keep in mind if you're MTL vaper you will have to stuff maybe a little bit additional cotton in the juice port. The problem I have with Xeta is that all the chimney and air flow inserts accommodate every type of vaping, except for couple styles of MTL. Everybody knows the best MTL vape you can get is by reducing air flow just under the coil. The problem is the only single hole airflow insert is 0.8mm which is super tight. Next smallest air insert is with 2x 1mm holes, which produces to lose draw for me. I haven't used it for DL vaping, but I imagine it should work well with that style. It's probably just a bit restricted, so not for super low and hot builds. But then again why would you build low builds in a single 18650 battery device anyway. I'd recommend this product for people who are into true MTL vaping which is with 0.8mm or for people who like lose MTL vape similar to BVC coils in nautilus tank fully open. For those in between, this won't be for you, unless they release additional airflow inserts with single 1mm and 1.2mm hole. I hope they do though.
Reviewed on Was this review helpful to you? Yes / No
YFTK KA V8 Nano Styled RTA Rebuildable Tank Atomizer
YFTK KA V8 Nano Styled RTA Rebuildable Tank Atomizer

Avatar
cebzab
Member

VERIFIED OWNER
  • JoinedAug 2018
  • Posts 20
  • Reviews 41
  • Kudos7
Overall   (4.2)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
Build quality Flavor Air inserts and PC tank included Good for lose MTL and small coils DTL
CONS
Airflow control whistles a lot when only 2 or less holes are open. Air inserts included are all to wide for true MTL
I got this with an idea to use it as MTL atty. I built my regular build which is 5 wraps of 28 awg kanthal, +- 1 ohm. The flavor is there. Really good, but it felt too airy. So I tried to have only 1 hole open with airflow control, but then it whistles alot. Compared to Dvarw vape style is more open even with the smallest air insert and form wise it's a lot bigger and heavier while having less capacity without offering anything different except for the top fill. It looks better though :) My conclusion is that this atty is best suited for people who like lose MTL or restricted DTL with builds around 0.7-0.8 ohm. It seems as if it was made for a relaxed type of vape. If you want a true MTL be prepared to fiddle with it to make it work without AFC whistling. If the whistling sound doesn't bother you then go for it. It's versatile and the flavor is very good.
Reviewed on Was this review helpful to you? Yes / No
SXK BB Styled 60W VW APV Box Mod Kit
SXK BB Styled 60W VW APV Box Mod Kit

Avatar
cebzab
Member

VERIFIED OWNER
  • JoinedAug 2018
  • Posts 20
  • Reviews 41
  • Kudos7
Overall   (4.2)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
All in one Portable DNA chip with USB Stylish A lot of accessories
CONS
Resistance not reading right/not calibrated Condensation outside boro tank A bit heavy
Before we begin, a little disclaimer. I owned this device for a short time. I used it only with vapeshell bridge. I haven't tried nautilus or kanger bridges yet. But i will in next week or so. These experiences that I will write are from using only sxk bb with vapeshell as a MTL setup. SXK Billet Box is an interesting device. I like it more then original because it has usb port, which is kinda crucial if you're going to use DNA device. And in this specific case if this mod didn't have usb port it would be much less usable and precise. It's an AIO that's pocket friendly size wise, but it is a bit heavy for what it is. Let's say the SXK Billet Box with the battery, vapeshell and boro tank filled is as heavy as Hcigar VTC75 Nano with a battery and a filled heavy tank such as By KA v8. If you want a lightweight setup there are far better options then this one. Let's say Tesla wye single 18650 + dwarv with bellcap would be at least 40-50% lighter. After you get this device you will need to do couple things if you want to make your life easier. 1st: search on the web "Anticondensa Billet Box by pfg85". Download the 3d model and take it to a 3d printing shop. This little piece of plastic will save you alot of trouble. Make it from temperature resistant materials such as PETG or PA11/PA12. 2nd: The Biggest con of this device is that it isn't reading the right resistance when u attach boro tank with a bridge. I could bet my right hand that SXK doesn't do anyting with this chip when they install it in the device. They don't do any setting up or calibration. What is preloaded by evolv that's what you get. What you need to do is calibrate resistance of the mod inside escribe. My previous dna mods when they needed calibration they were off by 0.007-0.009 ohms. This device needed to be adjusted much more. The difference was 0.40 ohms, which is a very big one compared to dna mods with 510 connector. Conclusion. It's an average device, but with a bit of love and effort invested it can be great.
Reviewed on Was this review helpful to you? Yes / No
304 Stainless Steel + PEI Hybrid Drip Tip for Berserker MTL RTA
304 Stainless Steel + PEI Hybrid Drip Tip for Berserker MTL RTA

Avatar
cebzab
Member

VERIFIED OWNER
  • JoinedAug 2018
  • Posts 20
  • Reviews 41
  • Kudos7
Overall   (4.5)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Good looking drip tip, comfortable to use
CONS
Narrow hole
Looks good, feels good. Only problem is subjective if you don't prefer drip tips with narrow hole this isn't for you. I haven't measured it, but the diameter of the hole is around 2.5mm. On my other MTL drip tips the diameter of the hole is usually around 4mm. But if you enjoy drip tips with narrow air flow, you will enjoy this one a lot.
Reviewed on Was this review helpful to you? Yes / No