shopping cart empty
gabiano87's Product Reviews
Sort:
Authentic Merlin RTA
Authentic Merlin RTA

gabiano87
Member

VERIFIED OWNER
  • JoinedFeb 2014
  • Posts 73
  • Reviews 169
  • Kudos53
Overall   (4.7)
› Quality
› Value
7 of 7 people found the following review helpful
PROS
very nice design good machining good 4ml capacity
CONS
loose afc on one of my two tanks notch coil is too big
Bought two of these as the design looked like a winner when I saw it online and seems that it was a good purchase. Having tried the serpent which I really disliked this looked like my next shot at finding a good single coil atty apart from KF's Packaging is good and comes with the usual spares. The atty came clean with no oil and is built really well with no sharp edges. I have two atties and on one the afc is very loose but on the other it is perfect. That is the only machining fault I could find. Its no biggie and still works as expected. The supplied notch coil is pretty useless imo as it is too big for the tank and I broke it trying to fit in properly. As for the vape it took me quite a while to find something that I was happy with. I tried claptons, regular kanthal and ss. What I found is that I really don't like too beefy a coil in this as I find the vape was far too hot for me, I think this is best for mellow retricted MTL and for the people who like great rich flavour. I ended up with one tank using the reducer and with a fused clapton 2 times 28 gauge NI80 with 36 outer/ 6 wraps around a 3mm rod. Really a beautiful vape when I put this build in and can see me keeping this build for the foreseeable future. It really produces thick tasty vapour, fully saturated. I really like the wicking on this tank as all you do is snip and tuck so even if you just had a crap cutter you could even set it up with a key if you were out and about. Overall its a great tank and if you are still looking for a single coil tank is well worth consideration.
Reviewed on Was this review helpful to you? Yes / No
Coppervape Skyline Styled RTA Rebuildable Tank Atomizer
Coppervape Skyline Styled RTA Rebuildable Tank Atomizer

gabiano87
Member

VERIFIED OWNER
  • JoinedFeb 2014
  • Posts 73
  • Reviews 169
  • Kudos53
Overall   (5.0)
› Quality
› Value
5 of 5 people found the following review helpful
PROS
Flawless machining Heavy solid weight Looks like good quality glass. Vapes like a dream and gives an excellent MTL experience Best JFC I have used which actually works like it should. Clean super easy to wick.
CONS
Top cap has to screw lid off to fill....no biggie Post holes not off set but that is about it.
So I have been using this all day so of course it is a basic review but it has had a good two tanks through and I am really impressed. The machining is the best I have of any clone I have bought before which is countless. The metal looks clean and of a good quality so should last as long as you care for it. Screws are not my fave but they are not sharp so I could tighten my 27 gauge wire with no problem. The threading on the jfc is ridiculously smooth for a clone. If that was the original I would feel happy with that threading. I have had zero leaks and not even a peep of a gurgle so I have no reason to think this will change. Also this clone comes super clean. No grease or funky smell so just a small rinse for peace of mind. presentation is good too with lots of spares. Looks wise this tank really hits the spot for me. Clean edges and great design. The vape is perfect for me so far. I am using the 3 small holed air discs and it is a fantastic MTL that is seriously the smoothest draw I have ever taken. So early days and I have yet to try a clapton or 3 mm coil for more airy vapes but with the set up so far it really hits the spot and is well worth the money. And for any newbies this tank is very easy to set up and wick so would make a great first venture into rebuildables
Reviewed on Was this review helpful to you? Yes / No

gabiano87
Member

VERIFIED OWNER
  • JoinedFeb 2014
  • Posts 73
  • Reviews 169
  • Kudos53
Overall   (1.0)
› Quality
› Value
3 of 3 people found the following review helpful
PROS
Fantastic Build Quality, smooth edges perfect build deck good looking
CONS
Bad 510 connection meaning ohms were unpredictable post hole positions can take a bit to get used to
I was very excited about this atty and It left me feeling blue. The 510 connection was not done properly and it meant ohms were left jumping about like crazy. Having ordered the silver to see if it was on both I can now confirm that the SS one is behaving perfectly so it was just mine in black. So this would score very highly like the SS one I now have but there must have been some mess up in the black version run.
Reviewed on Was this review helpful to you? Yes / No
Replacement Socket Set Screws for Atomizers (20-Pack)
Replacement Socket Set Screws for Atomizers (20-Pack)

gabiano87
Member

VERIFIED OWNER
  • JoinedFeb 2014
  • Posts 73
  • Reviews 169
  • Kudos53
Overall   (4.2)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
They work in the Velocity RDA Quantity
CONS
A few bad ones
They have done the job and I can now start using my Velocity RDA again so they get a thumbs up. Good price and quantity should mean they last a fair while. Good to mention that so far 2 of the have been junk and could be a few more bad ones in pack.
Reviewed on Was this review helpful to you? Yes / No

gabiano87
Member

VERIFIED OWNER
  • JoinedFeb 2014
  • Posts 73
  • Reviews 169
  • Kudos53
Overall   (3.2)
› Quality
› Value
2 of 2 people found the following review helpful
PROS
They are easy to wick Work well
CONS
Price amount in pack
Saw these and thought I would give them a try since now of FT. First impressions were that I was a little shocked at how much came in the pack. Seeing 20 I would have thought that I could make 2 wicks with 1 but thats not the case on most of my wick jobs. So apart from that and price they actually do work rather well. The Goliath V2 worked a treat with claptons and are wicking great with no install taste. Its one of those things where it does taste great but its really hard to gauge if its any better that what I have. I will finish the pack and report anything I might need to elaborate.
Reviewed on Was this review helpful to you? Yes / No