krzych's Product Reviews
Sort:

krzych
Verified

VERIFIED OWNER
  • JoinedOct 2013
  • Posts 9
  • Reviews 91
  • Kudos0
Overall   (5.0)
› Quality
› Value
At last, a scalpel like tool for precise cutting. No more gillettes ;)
Reviewed on

krzych
Verified

VERIFIED OWNER
  • JoinedOct 2013
  • Posts 9
  • Reviews 91
  • Kudos0
Overall   (3.7)
› Quality
› Value
PROS
Spares, many, many Nice price Works
CONS
Very, i mean VERY sharp edges, almost all of them
This Kayfun has many spare parts. It can be build into almost any Kayfun you want to and it's price is really nice. The only disadvantages I have found are very rough edges almost everywhere - any edge which isn't the outside one after assembling is rough enough that you can cut to pieces you hands and not only hands :P. I had to be very careful not to cut myself with threads, edges near the threads, chimney, top cap lower edge, base upper edge, even posts edges and drip thread. Everything here needs polishing paper, and as far as I see it, at least hours of work (polishing, cleaning, testing, polishing, cleaning, and so on...). So..., back to the price... Not so low now ;). But anyways, it works. So far I have tested standard setup (full height) with a PMMA. Metal tube will work either as it's height is the same. Shorter one will be tested soon enough, but I rather want to wear off my actual setup before I do this. My cleaning was based on boiling the metal parts, and after that all the pieces were covered by some strange coating/deposit which looked like steam, but was quite hard to remove. As I boiled it in the same enamelled/glazed dish as my earlier vaporizers, I suppose it's this one's "feature". Just don't know what this is. But after cleaning it up, seems ok... (it's just hard to clean threads though... so I didn't do it thoroughly)
Reviewed on

krzych
Verified

VERIFIED OWNER
  • JoinedOct 2013
  • Posts 9
  • Reviews 91
  • Kudos0
Overall   (3.2)
› Quality
› Value
PROS
Really light Nice in touch Full flavor (better than Kayfun) Big capacity (although it's not like 8ml, but near)
CONS
Lack of anti-flood metal ring Finish is not perfect, can be sharp Air flow ring hard to turn without scratching your nails (and I'm not a girl, keep it in mind)
A nice vaporizer if it would have anti-flood ring as the original. Without it, the setup is very very hard. Either you will have occasional burn taste or you will be flooded with the e-liquid. Finding the middle point is very hard and even if you succeed, the pressure in the tank is changing while emptying so it will work only for a constantly filled up vaporizer. Quite hard to use in my opinion. But if they would have supply this ring, it would be very nice vaporizer. A pity that the other (with the ring) has a plastic mouth piece which is essential because the thread on it (which will be easily broken on plastic). So... if I had to choose one of them, I would choose none :P. There is a wider one (22mm) in FT stock with the ring and with metal mouth piece (but it's SS so it's not light unfortunately)...
Reviewed on

krzych
Verified

VERIFIED OWNER
  • JoinedOct 2013
  • Posts 9
  • Reviews 91
  • Kudos0
Overall   (3.5)
› Quality
› Value
PROS
Strong, visible ray Big battery String casing
CONS
Not enough power to light a match, even after minutes
Nice tool for pointing outdoors, very bright ray, visible even when used for really big distance (like hundreds of meters). Unfortunately, it's power is not big enough to light a match like on many videos on-line. This one won't do it. Additionally, the lens isn't very good quality. It's mounted with glue which in my case was over the lens (very small amount, but it's there, not possible to remove without breaking it). I accepted my choice, but really, I do not have any idea what this one is for - as a pointer is way too strong indoors, as a burner is not enough, only pointing outdoors could be good, but it's not a weapon one, so... what for?
Reviewed on

krzych
Verified

VERIFIED OWNER
  • JoinedOct 2013
  • Posts 9
  • Reviews 91
  • Kudos0
Overall   (4.2)
› Quality
› Value
PROS
Very very good quality
CONS
Slightly bigger than the 'delicate' ones
It's a good choice if you plan to make something really sturdy. But if you want as-small-as-possible solution, it's not for you.
Reviewed on