shopping cart empty
[dismiss] FastTech will be on holiday from October 1st, 2020 to October 8th, 2020 to celebrate the National Day Holiday and Mid-Autumn Festival. Services will resume on October 9th, 2020 (details).
starlyte's Product Reviews
Sort:
Nemesis Style Mechanical Mod (Copper)
Nemesis Style Mechanical Mod (Copper)

Avatar
starlyte
Member

VERIFIED OWNER
  • JoinedSep 2013
  • Posts 146
  • Reviews 36
  • Kudos26
Overall   (5.0)
› Quality
› Value
2 of 2 people found the following review helpful
This is a great looking Nemmy clone, and I adore copper. It has a super conductivity of both current...and heat. That's the only problem with this mod, it conducts the heat and after chain vaping, you have to stop, as it's too hot to touch. It gets a great patine on the copper after a bit of use, really beautiful, and all the pins are easy to adjust. It's a perfect fit for a Kick, and includes an extra section for one, so you can use a 18650 battery in it with your kick, non-protected of course. I'm very tempted to try the SS and Brass version, to see if it heats up less. I don't find that my SS mods heat up as much. But all in all, with the divers battery sizes, it is a great mod. Very small and easy to hold driving with a 18350 and a small top piece for your juice, for an example. Or perfect for any tank atty with kick and 18650, when you're home. It's the most versatile Mechanical mod I have, and very attractive. You can also do a little work and have a magnetic switch, with the magnets from FT, for next to nothing, and it is very easy to do.
Reviewed on Was this review helpful to you? Yes / No

Avatar
starlyte
Member

VERIFIED OWNER
  • JoinedSep 2013
  • Posts 146
  • Reviews 36
  • Kudos26
Overall   (2.5)
› Quality
› Value
1 of 1 people found the following review helpful
I did in no way abuse these items, but they stopped working, both (I bought 1 for me, 1 for my friend) after a very short time. I had one in metal, that only works on one setting, and gets hot, so I thought that in rubber it would stay cooler. It didn't heat up excessively, but as neither of them work now, I'll never know. I'm a bit disappointed, as the principal is great, and you don't need to look every where for your PV if you're a night time vaper like me. I guess I'll send them back, better luck next time ;)
Reviewed on Was this review helpful to you? Yes / No

Avatar
starlyte
Member

VERIFIED OWNER
  • JoinedSep 2013
  • Posts 146
  • Reviews 36
  • Kudos26
Overall   (5.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Glass inner tank SS mesh ready to vape, with 1.2ohm resistance, But easy to change the resistive wire only Adjustable center pin Copper center pin Nice looking outer protection Good cloud maker Arrives rearing to go!
CONS
The resistance installed is too low for many APV's electronic (min is 1.3 ohms), but you don't need to change the mesh, only the resistance coil
This is really a good, nice looking, easy to use tank. It has a stainless steel mesh, which works very well, and makes the recoiling very simple. As you have to take off the joint to recoil it, be careful, as it jumps away like a rubber band and is not simple to find! With its super center pin in copper, adjustable with a screw driver, which does in no way come into contact with the juice, and the easy access coil, you have a super cloud maker, well worth finding a good battery holder to use it with. It is, in principal, the same system as the Kayfun, and its family, but I find it a better vape than my KFL and Russian, maybe because of the SS coil instead of a silica or cotton one. No chance of a burnt wick taste, or, if you check th juice level, of dry hits. Also the air control is easier to set, and mine doesn't seem to need the same precision to avoid whistling, it's not a whistler as far as I can tell. The KFL is a precision setting to get the right air with no whistle. It does tend to gurgle, how ever, but I think it's due to my set up, and a question of air/juice intake, which should be easy enough to cure ;) I adore this device, with its SS protection for the tank, its SS mesh installed, although I did recoil it at a higher resistance, but without needing to change it, and its clouds of vapor. A glass tank is an essential item for my juice holders (or SS). I might get another of these as they are ideal in my opinion. 10/10. It's a super vape :D
Reviewed on Was this review helpful to you? Yes / No

Avatar
starlyte
Member

VERIFIED OWNER
  • JoinedSep 2013
  • Posts 146
  • Reviews 36
  • Kudos26
Overall   (4.0)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Stainless steel. Mechanical never dies. Switch is easy to push. Switch blocking screw.
CONS
A bit wobbly on the threading. Green rubber bands, not metal ones. Switch needs to be unscrewed then put back to work occasionally. BIG voltage drop.
For the price, and the fact that it does always work, it's worth having. But I found the volt drop and the wobbly threads a bit of a bind. But it always works!
Reviewed on Was this review helpful to you? Yes / No

Avatar
starlyte
Member

VERIFIED OWNER
  • JoinedSep 2013
  • Posts 146
  • Reviews 36
  • Kudos26
Overall   (4.2)
› Quality
› Value
1 of 1 people found the following review helpful
PROS
Well built, solid SS. The threads are good, the 510 attachement is just, and all things considered it's a great little telescopic, Stainless steel, well vented device.
CONS
The green bands are simple silicone O-rings, floating on the tube. Sometimes, don't know why, you need to un screw then put back the bottom, switch part.
This is a good mechanical device, solid, well built, practical, easy to use. It works with out a problem.
Reviewed on Was this review helpful to you? Yes / No